Home Shop Under door Door seals Tape & strips Window seals Letterbox Chimney Garage door Guides Cart Shop the range

A brush door seal with a hinged cover that hides the screws

A 914mm white strip with a hinged front cover, adjustable slots and fixings included.

The Stormguard cover-clip brush seals gaps up to 25mm under internal or external doors. The hinged cover clips shut over the screw heads for a tidy finish, and the strip can be cut to size.

£22.99 inc. VAT
Fast, FREE United Kingdom delivery on all orders £30 or more. Orders under £30 pay a flat £3.99 delivery.

A 914mm white Stormguard brush draught excluder for the bottom of a door, with a hinged cover that conceals the fixings. It seals gaps up to 25mm and can be cut to size.

Secure CheckoutCard details never touch our servers
Honest AdviceAsk us anything before you buy
Free ShippingMinimum spend required
Easy ReturnsHassle free returns & refunds
Hinged coverClips shut over the screws for a neat, finished look.
25mm gapSeals gaps up to 25mm under the door.
Adjustable slotsSlotted fixing holes let you fine-tune the brush height.
Fixings includedScrews are supplied, and the strip can be cut to size.

Stormguard 914mm White Clip-Cover Door Brush Seal

A screwed-on brush seal is one of the most reliable ways to draught-proof a door, but the exposed screws are not everyone’s idea of tidy. This Stormguard version solves that with a hinged cover that clips over the fixings, so the strip looks like a clean white trim along the bottom of the door.

It is 914mm long, which suits the majority of UK doors, and can be cut to size with a hacksaw or a sharp blade if your door is narrower. A row of dense bristles seals gaps up to 25mm, and the slotted fixing holes mean you can adjust the strip up and down after fitting, which is useful when you change a carpet or a threshold.

It is a good option for an internal or external door where you want a permanent, adjustable seal rather than a stick-on strip. Mark the fixing positions, drill small pilot holes, screw the strip on, set the brush height and then close the cover.

Specifications

BrandStormguard
Length914mm (91.4cm)
Maximum gap fill25mm
MaterialPolypropylene and PVC
ColourWhite
FixingScrews, with a hinged cover
Can be cut to sizeYes
BrandStormguard

Stormguard 914mm White Clip-Cover Door Brush Seal

£22.99 inc. VAT

Free United Kingdom delivery · easy returns · secure checkout

Frequently Asked Questions

What gap does it seal?

Gaps up to 25mm under a door.

Are screws included?

Yes, fixings are supplied.

Can I cut it to size?

Yes. It can be trimmed to fit a narrower door.

What does the clip cover do?

It hinges shut over the screw heads, so the fixings are hidden once the strip is in place.

How do I check this seal suits my door gap?

Measure the gap under the door at both ends and the middle, because floors are rarely level. Choose a seal whose gap range covers the biggest measurement.

How much is delivery?

Delivery within the UK is free on orders of £30 or more and a flat £3.99 below that. The delivery estimate for your address is shown at checkout before you pay.

Fitting a screw-on brush seal: tools, tips and tidy finishes

2 min read draughtexcluders.uk

What you need

A tape measure, a pencil, a small drill with a pilot bit, a screwdriver and a hacksaw or sharp craft knife.

The sequence

Hold the strip to the door with the bristles just touching the floor, mark the slot positions, drill pilot holes, and fix loosely. Adjust the height, tighten the screws and snap the cover shut.

Fire doors

Check whether the door is a fire door before drilling. Drilling into a fire door can compromise its rating, so use a suitable approved fire-door seal instead.

Browse all door bottom seals & brush strips

Ready to fit the Stormguard 914mm White Clip-Cover Door Brush Seal?

A 914mm white strip with a hinged front cover, adjustable slots and fixings included.

Still deciding? Ask us a question and we'll help you choose.

Page summary

Stormguard 914mm White Clip-Cover Door Brush Seal (Stormguard) is sold at £22.99 with free UK delivery over £30. A 914mm white Stormguard brush draught excluder for the bottom of a door, with a hinged cover that conceals the fixings. It seals gaps up to 25mm and can be cut to size. Length: 914mm (91.4cm). Maximum gap fill: 25mm. Material: Polypropylene and PVC. Colour: White. Fixing: Screws, with a hinged cover.

Stormguard 914mm White Clip-Cover Door Brush Seal £22.99