draughtexcluders.ukStop the draught. Keep the heat. Shop
Home Shop Under door Door seals Tape & strips Window seals Letterbox Chimney Garage door Guides Cart Shop the range

A twin-sided draught excluder that slides onto the door and stays there

Six sponge inserts, a grey cloth cover and elastic fixings: a draught excluder you can adjust to the door.

This 88cm twin-sided excluder wraps around the bottom of a door up to 4cm thick, with three sponge inserts each side. Take the sponges out and the cover folds flat in a drawer.

£26.99 inc. VAT
Fast, FREE United Kingdom delivery on all orders £30 or more. Orders under £30 pay a flat £3.99 delivery.

An 88cm twin-sided draught excluder in grey cloth with six removable 30cm sponge inserts. It slips over the bottom of doors up to 4cm thick and folds flat for storage.

Secure CheckoutCard details never touch our servers
Honest AdviceAsk us anything before you buy
Free ShippingMinimum spend required
Easy ReturnsHassle free returns & refunds
Twin-sided designSits on both sides of the door, so it blocks air from either direction and moves with the door.
Six sponge insertsThree 30cm sponges on each side slot into the cloth cover, and you can take them out to wash the cover.
Elastic and hook-and-loopElastic bands and hook-and-loop tape on the top help hold it in place.
Doors up to 90cm wideAn 88cm length and a 4cm door thickness limit, suitable for most internal and many front doors.

About this under door draught excluders

fowong 88cm Twin-Sided Grey Draught Excluder

A twin-sided draught excluder works differently to a loose snake: it clamps around the bottom edge of the door like a sleeve, with a sausage of sponge on each side. Because it travels with the door, nobody trips over it and nobody has to put it back. This one is 88cm long and suits doors up to 4cm thick.

The construction is modular. Six sponge pieces, each 30cm long, slip into the cloth cover, three on each side, so you can shape the length of the filling to your door and pull them out for washing. The cover has elastic bands and hook-and-loop tape along the top to keep it from sliding about, which helps on a door that is shut firmly many times a day.

It handles a gap up to about 4cm, which is typical for an internal door or a front door with a modest gap. On a thick carpet there is a little resistance when the door opens and shuts, since the excluder sits near the floor on both sides. When it is not in use the cover folds flat and the sponges stack in a drawer.

The details

Specifications

Brandfowong
Length88cm
Height5cm
Maximum gap fill4cm (1.57 inches)
Fits door thickness up to4cm
Inserts6 sponge pieces, 30cm each
MaterialFabric cover, sponge cotton filling
ColourGrey
Suits doors up to90cm wide

fowong 88cm Twin-Sided Grey Draught Excluder

£26.99 inc. VAT

Free United Kingdom delivery · easy returns · secure checkout

Got questions?

Frequently Asked Questions

How thick can the door be?

The excluder fits doors up to 4cm thick. Measure your door edge before you order, because thicker front doors may be too deep.

Can I wash the cover?

The sponge inserts come out of the cloth cover, so the cover can be cleaned separately. Check the care guidance before machine washing.

Will it work on carpet?

It works, but there is a little resistance when the door opens and closes on a thick carpet because the excluder is close to the floor on both sides.

How many sponge pieces are included?

Six, each 30cm long, three on each side of the door.

Can I measure my door before I order?

Yes, and you should. Measure the width of the door at the bottom edge and the gap between the door and the floor at its widest point, then compare both with the size and gap fill on this page.

How much is delivery?

Delivery within the UK is free on orders of £30 or more and a flat £3.99 below that. The delivery estimate for your address is shown at checkout before you pay.

The complete guide

Setting up a twin-sided draught excluder so it does not slip

2 min read draughtexcluders.uk

Fit the sponges first

Put three sponge pieces into each pocket of the cloth cover and lay the excluder flat. The pieces should sit end to end with no big gap between them.

Slide it on

Open the door, slide the cover over the bottom edge with a sponge on each side, and close the door. Use the elastic bands and the hook-and-loop tape to stop the cover slipping.

Adjusting the length

If your door is narrower than 88cm, push the sponges to the middle and let the cover end flop slightly. For a very worn floor with a variable gap, you can swap one of the sponges for a thinner piece in the lowest spot.

Browse all under door draught excluders

Ready to fit the fowong 88cm Twin-Sided Grey Draught Excluder?

Six sponge inserts, a grey cloth cover and elastic fixings: a draught excluder you can adjust to the door.

Still deciding? Ask us a question and we'll help you choose.

fowong 88cm Twin-Sided Grey Draught Excluder £26.99